MW Series Micro Powder Mill

Little abrasion, Low noise, Little dust

MW Series Micro Powder Mill is equipment designed for customers who need to make ultra-fine powder. This machine is equipped with efficient pulse dust collector and muffler, which can reduce dust and noise. And the whole production won’t take effect on environment.

Applications: Chemical Industry, paint, cosmetics, medicine, food additive,etc.

Learn More About Liming® MW Series Micro Powder Mill

1. Efficient

Compared with jet mill, mixing grinder and ball mill of same finished product size and motor power, MW Micro-Powder Mill has double capacity and saves 30% energy.

2. Long Life of Spare Parts

Forged by special material, the ring and roller can be used for about one year while grinding calcium carbonate.

3. High fineness and flexible adjustment

The product size can be adjusted between 325 mesh to 2500 mesh (47-5micron).

4. Environmentally friendly

The application of pulse dust collector and muffler greatly reduce dust pollution and noise.

Working Principle

The motor drives the main shaft and every turnplate through the reducer. The reducer drives dozens of rollers to rotate against race way of ring through pin. Small material crushed by hammer crusher is transported into hopper by elevator, and then vibrating feeder shall feed material to the central part of upper turnplate evenly. The material falls to circle under the centrifugal force and comes down to raceway of ring to be crushed into powder. After grinded in the first race way, the material goes to the second and third turnplate. The blower inhales the external air into the mill and carries the powder after third turnplate into powder-separator. Turbine in the separator makes the coarse powder drop down and regrinded and the fine powder shall go into cyclone powder collector together with air current and go down through discharge valve as final product; at the same time, air current with a little dust goes out through blower and muffler after purified by filter.

Specifications – Technical Data

Model	Main diameter(mm)	Quantity of grinding ring(layer)	Quantity of roller(piece)	Main shaft speed(rpm)	Maximum feed size(mm)	Output fineness(μm/mesh)	Capacity(t/h)	Dimension(m)	Main mill Power(kw)	Seperator Power(kw)	Blower Power(kw)
MW880	800	3	21	230-240	≤10	5-45	0.5-5	16700*3400*7300	75	18.5	45
MW980	930	4	29	200-220	5-45	0.6-6.5	14700*4800*7200	2*45	30	55
MW1080	1035	4	28	180-200	≤15	5-45	1-8.5	22700*36500*8600	132	30	75
MW1280	1300	4	32	135-155	≤20	6-45	1.5-12	27320*4500*10250	185	75	110-132
MW1680	1680	4	44	120-130	≤20	9-100	3.8-30	26300*7500*11900	315	132	200-220